Gym Monster Ultra

Will it fit?

Put the Ultra in your room at full size. Then tape out the floor and check your ceiling.

Folded measurements show the approximate overall size of this 3D model, including protruding parts. Check the product specifications before planning a tight fit.

Loading the 3D model

Drag to turn it

How to position it
  1. Find the floor

    Move your phone slowly over a clear, well-lit floor until the model appears.

  2. Move

    Touch the model and drag with one finger.

  3. Turn

    Place two fingers on the model and twist.

Size is fixed. Pinching will not make the machine smaller.

If it jumps or disappears, close AR and scan the floor again.

Tall, with the arms fitted
227 cm
Long
166 cm
Wide at the baseWide
85 cm
Across the arms at the top
126 cm

Seeing it in your room

  1. Point your phone at the floor where the machine would go.
  2. Move the phone slowly from side to side until the Ultra appears.
  3. Walk around it. You can move it and turn it, but you can't resize it.

The 3D model is within a few centimetres of the real machine. For exact sizes, go by the numbers on this page.

On the floor

Tape it out

You'll need masking tape and a tape measure.

  1. Pick where the tower goes. It's the tall end with the screen.
  2. Tape a rectangle 166 cm long and 85 cm wide. That's the Ultra in use.
  3. Tape a line across it 70 cm from the tower end. Folded, the Ultra takes up that 70 x 85 cm part.
  4. Look up. At the top, the arms are 126 cm across, so they reach past the tape on both sides.
  5. Then check your ceiling below.
Floor plan of the Gym Monster Ultra In use it takes up 166 x 85 cm. Folded, it takes up 70 x 85 cm at the tower end. At the top, the arms are 126 cm across. 126 cm 85 cm 70 cm 166 cm
  • In use, 166 x 85 cm
  • Folded, 70 x 85 cm
  • Arms at the top, 126 cm across
  • Tower end

Overhead

Check your ceiling

The Ultra is 227 cm tall with the arms fitted. Type your ceiling height to see the gap.

See the Gym Monster Ultra